ABOUT PRODUCT
Dynamic Machine atomizes liquid into a fog, mist or spray of small droplets. It can atomize both water or oil based solutions as well as emulsions and dilute suspensions of wettable powders.

Features:
 Max. area coverage as compared to any other conventional fogger.
 304 Grade Stainless Steel Body.
 Chemical Level Indicator.
 Comes with pre-fitted liquid flow control valve for ease of use.
 100% Convenient, Portable & Easy to use.

TYPICAL USES OF FOGGING MACHINE INCLUDES :-
 Humidification (Fogging Water)
 Odor Control (Fogging Odor Neutralizers, Scents or Masking chemicals)
 Applications of Insecticides
 Application of Germicides or Sanitizing Chemicals for Cleaning & Sanitation Purposes
 Control of Mold and Mildew (Applying Sporicides, Fungicides or anti- mildew Chemicals) These foggers atomize liquid into small droplets by shearing them in high turbulent section of nozzle.

A low rate [30-60 ml per minute] produces a dry fog of small droplets that float extensively and diffuse widely. Larger flow rate [120-150 ml per minute] produce progressively larger droplets.

Body & Tank : 304 Grade Stainless Steel Tank Capacity : 5 Litre of Chemical Storage Blower Motor : 26000 RPM Motor
Nozzle : 1 Counter Rotation Vortex Nozzle
Chemicals : Can atomize both oil-based and water-based liquids Control Valve : One turn. Brass Valve
Particle Size : 5-30 μ, adjustable. Liquid viscosity and density can affect particle size
Range : Visible fog, 20-30 ft. (2.5m)
Input : 230V, 50Hz, Single Phase, AC Supply Dimensions : [33 x 41 x 23.5 cm] L x H x Dia Net. Weight : 6.50 Kg (Approx.)

CLEANING THE FOGGER
Normal Cleanup: When Fogging is complete, remove the suction tube from the liquid source and operate the fogger for one minute with valve full open. This will expel any liquid remaining in the fogger's internal lines. Transfer excess chemical from tank to an appropriate container. Cleanup of Difficult Liquids: After fogging a viscous liquid, emulsion or a solid suspension, begin with a normal cleanup (Step A). Then put suction tube into an appropriate solvent for your fogging chemical (water for water- dispersible liquid, kerosene for oil based liquids) and operate for 1-2 minutes flushing residual chemicals with clean solvents. Then again repeat Step A. Cleanup for Long Term Storage: Remove all the liquid from the tank to eliminate the potential for long term chemical attack on tank, suction tube or tubing. Then follow Step A or B.